Changes between Version 13 and Version 14 of construction_guide


Ignore:
Timestamp:
Feb 8, 2014, 10:54:53 PM (11 years ago)
Author:
smoser
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • construction_guide

    v13 v14  
    77
    88'''Prerequisites:'''
    9   - a Flarm device, equipped with the latest Firmware (at least 5.09 from 2013/03/01)
     9  - a Flarm device, equipped with the latest Firmware (at least 5.09 from 2013/03/01) and a GPS receiver
    1010  - a working internet connection from the place where ground station is installed
    1111
    … …  
    1414  - the rs232 communication board for the Raspberry (the board can be ordered [http://www.abelectronics.co.uk/products/3/Raspberry-Pi/29/Serial-Pi-RS232-Interface here])
    1515  - a power supply for 12V and 5V (e.g. [http://www.meanwell.com/search/ADD-55/ADD-55-spec.pdf Mean Well ADD-55A])
     16  - an external antenna for the flarm device
     17  - a box (minimal 30x30x15cm) to incorporate and connect all components
    1618  - for the [attachment:communication_cable.jpg  communication cable] between Flarm, Raspberry and Powersupply:
    1719    - a short RJ45 cable (will be cut in parts)