This page describes the most convenient method for setting up a Flarmradar Ground Station. This is the component that reads out the flarm device and streams the data it to the Flarmradar Server.  

=== Construction Guide ===

===== Before you start =====
While the ground station can be built in short time, consider that it takes a considerable amount of time for finding a good spot on the airfield. A direct line of sight to the entire runway and the open sky are optimal conditions to achieve a good result.  

Prerequisites:
  - a Flarm device, equipped with the latest Firmware (at least 5.09 from 2013/03/01)
  - a working internet connection from the place where ground station is installed

Components to buy:
  -