Changes between Version 13 and Version 14 of construction_manual

Timestamp:

Oct 12, 2013, 4:25:42 PM (12 years ago)

Author:

dominic

Comment:

--

construction_manual

@@ -31 +31 @@
     - For pin assignment of the RJ45-connector on Flarm, please consult [http://www.flarm.com/support/manual/FLARM_InstallationManual_v5.00E.pdf Flarm Installation Manual] 
   
-   - To protect your Pi against over current, a 500mA fuse should be installed in the power supply route to the Pi (e.g. [http://de.rs-online.com/web/p/sicherungshalter-fuer-frontplattenmontage/3595961/ RS-Online])
+   - To protect your Pi against over current, a 1A fuse should be installed in the power supply route to the Pi (e.g. [http://de.rs-online.com/web/p/sicherungshalter-fuer-frontplattenmontage/3595961/ RS-Online])
     - Wiring instructions: 12V DC IN --> Pi Fuse --> DC/DC converter --> Micro-USB connector --> Pi
     - Powering your Pi over the GPIO pins is not recommended. Reasons see [http://raspberrypi.stackexchange.com/questions/1617/how-do-i-supply-power-through-the-gpio here]
@@ -65 +65 @@
 ||1A Fuse for Pi||[http://de.rs-online.com/web/p/feinsicherungen/0563380/ Link]||1,34€||
 ||Edimax Wireless Nano USB-Adapter||[http://de.rs-online.com/web/p/wireless-adapter/7603621/ Link]||11,00 €||
-||Cell 4||Cell 5||Cell 6||
+||RS232 to TTL converter||Ebay||~ 2 €||
 
 === Examples of already realized ground stations ===