Changes between Version 30 and Version 31 of construction_manual
- Timestamp:
- Feb 25, 2014, 10:09:55 PM (11 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
construction_manual
v30 v31 28 28 29 29 - Power supply from grid available 30 - Use an external Flarm power converter (e.g. [http://shop.segelflugbedarf24.de/product_info.php?info=p32_Update-Cable-RS232.html update cable]) and a standard cell phone charger to supply 12VDC and 5VDC. [attachment:Flarmradar_GS5.png Schematic] 31 - Use one standard external power converter (e.g. [http://de.rs-online.com/web/p/steckernetzteile/6666928/ RS-Online]) which supplies 12VDC and use a DC/DC converter (e.g. XXX) within the Flarmradar Ground station to convert 12VDC to 5VDC for the Pi. See [attachment:Flarmradar_GS4.png Schematic]. Make sure your DC/DC converter can deliver at least 600 mA of 5VDC to the Pi.30 - Use an external Flarm power converter (e.g. [http://shop.segelflugbedarf24.de/product_info.php?info=p32_Update-Cable-RS232.html update cable]) and a standard cell phone charger to supply 12VDC and 5VDC. [attachment:Flarmradar_GS5.png Schematic]. This setup is the minimalistic [attachment:Pi_RS232_Cables.jpg Setup], which will work perfectly for first trails or fixed installations. 31 - Use one standard external power converter (e.g. [http://de.rs-online.com/web/p/steckernetzteile/6666928/ RS-Online]) which supplies 12VDC and use a DC/DC converter (e.g. XXX) within the Flarmradar Ground station to convert 12VDC to 5VDC for the Pi. See [attachment:Flarmradar_GS4.png Schematic]. This is the indoor [attachment:indoor_GS.jpg Setup]. 32 32 - Use an internal power converter, which can supply 12VDC and 5VDC. See [attachment:Flarmradar_GS3.png Schematic] 33 33 - NO Power supply from grid available = battery power 34 34 - Use a 12V battery (e.g. [http://de.rs-online.com/web/p/bleiakkus/6603627/ RS-Online]) to power your Flarm and use a DC/DC converter (e.g. 2 x [http://de.rs-online.com/web/p/dc-dc-wandler-isoliert/7511459/ MEE3S1205SC] in parralel OR 1x [http://de.rs-online.com/web/p/dc-dc-wandler-isoliert/7553683/ TEN 6-2411WIN-HI]) to power your Pi. Make sure you buy a DC/DC converter with high efficiency so you don't drain your battery too fast. 35 35 - All in one power supply: The Mean Well power converter [http://www.meanwell.com/search/ADD-55/ADD-55-spec.pdf ADD-55A] offers 12V and 5V power output which can be run on standard power supply (88-264VAC) when available. If no power line is availble the device features a battery charger to which you will have to attach a 12V backup battery (e.g. [http://de.rs-online.com/web/p/bleiakkus/6603627/ RS-Online]). This battery will power the groundstation when disconnected from power grid. See [attachment:Flarmradar_GS2.png Schematic] 36 - A Flarmradar Groundstation using the Mean Well power converter and backup battery all installed in a roughed Peli Case can be seen in the two pictues to the right.[[Image(PeliFlarm2.jpg, align=right,height=250)]][[Image(PeliFlarm1.jpg, align=right,height=250)]] 36 37 37 38 … … 41 42 - To protect your Flarm against over current, a 500mA fuse should be installed in the power supply route to the Flarm (e.g. [http://de.rs-online.com/web/p/sicherungshalter-fuer-frontplattenmontage/3595961/ RS-Online]) 42 43 - Wiring instructions: 12V DC In --> Flarm fuse --> RJ45 connector --> network cable --> Flarm 43 - To connect your Flarm to the FGS, we recommend installing a RJ45 connector on the F GSfront panel and to use a short network cable to connect the FGS to the Flarm44 - To connect your Flarm to the FGS, we recommend installing a RJ45 connector on the Flarmradar Groundstation front panel and to use a short network cable to connect the FGS to the Flarm 44 45 - For pin assignment of the RJ45-connector on Flarm, please consult [http://www.flarm.com/support/manual/FLARM_InstallationManual_v5.00E.pdf Flarm Installation Manual] 45 46